无牙颌种植修复设计

doi:10.3969/j.issn.1005-4979.2013.01.001

摘要/Abstract

摘要： 牙列缺失后，常存在颌位关系异常，同时口腔黏膜组织萎缩变薄，敏感度增加，义齿难以获得良好的固位及咀嚼功能。种植修复能够降低骨吸收量，增加义齿稳定性，减少戴牙后疼痛，是恢复患者咀嚼功能的有效方法。但患者个体差异导致的咬合力大小，颌间距离，牙槽骨高度、宽度及质量，黏膜厚度等条件均有差异，不同医师提出的治疗方案各异，难以统一。本文拟就无牙颌种植修复常见问题及设计时应考虑的因素作以讨论。

关键词: 无牙颌, 牙种植, 全口义齿, 覆盖义齿

Abstract: The use of endosseous implants for complete dental restoration has gained popularity in the past few decades, with reliable long-term stability. Although most studies of the outcomes of prosthodontic rehabilitation with implant-supported dentures have focused on the evaluation of clinical and technical aspects, still several factors involving the design of restoration and surgery are remained debatable. This article will focus on these doubtful points and try to find out an accepted solution based on previous researches.

Key words: edentulous, dental implant, full denture, overdenture

中图分类号:

王佐林，范震. 无牙颌种植修复设计[J]. 《口腔颌面外科杂志》, 2013, 23(1): 1-7.

WANG Zuo-lin, FAN Zhen. Considerations Related to Implant-supported Protheses in Edentulism[J]. 《Journal of Oral and Maxillofacial Surgery》, 2013, 23(1): 1-7.

https://journal06.magtech.org.cn/Jweb_joms/CN/Y2013/V23/I1/1

参考文献

[1] Polzer I, Schimmel M, Müller F, et al. Edentulism as part of the general health problems of elderly adults[J]. Int Dent J, 2010,60(3):143-155.

[2] Emami E, Heydecke G, Rompré PH, et al. Impact of implant support for mandibular dentures on satisfaction, oral and general health-related quality of life: a meta-analysis of randomized-controlled trials[J]. Clin Oral Implants Res, 2009,20(6):533-544.

[3] Müller F, Hernandez M, Grütter L. Masseter muscle thickness, chewing efficiency and bite force in edentulous patients with fixed and removable implant-supported prostheses: a cross-sectional multicenter study[J]. Clin Oral Implants Res, 2012,23(2):144-150.

[4] Farias Neto A, Pereira BM, Xitara RL. The influence of mandibular implant-retained overdentures in masticatory efficiency[J]. Gerodontology, 2012,29(2):e650-e655.

[5] Sadan A, Raigrodski AJ, Salinas TJ. Prosthetic considerations in the fabrication of surgical stents for implant placement[J]. Pract Periodontics Aesthet Dent,1997,9(9):1003-1011.

[6] Raigrodski AJ, Sadan A, Salinas TJ. Managing malrelated arches and limited vertical space for implant-supported overdentures: a case report[J]. Pract Periodontics Aesthet Dent, 1998,10(2):163-170.

[7] Wheeler RC. Wheeler′s dental anatomy, physiology and occlusion[M]. 5th ed. Philadelphia: Saunders, 1974:144.

[8]   Correa S, Ivancik J, Isaza JF, et al. Evaluation of the structural behavior of three and four implant-supported fixed prosthetic restorations by finite element analysis[J]. J Prosthodont Res, 2012,56(2):110-119.
[9]    Roccuzzo M, Bonino F, Gaudioso L, et al. What is the optimal number of implants for removable reconstructions? A systematic review on implant-supported overdentures[J]. Clin Oral Implants Res, 2012,23 Suppl 6:229-237.

[10] Heydecke G, Zwahlen M, Nicol A, et al. What is the optimal number of implants for fixed reconstructions:a systematic review[J]. Clin Oral Implants Res, 2012,23 Suppl 6:217-228.

[11] Sagat G, Yalcin S, Gultekin BA, et al. Influence of arch shape and implant position on stress distribution around implants supporting fixed full-arch prosthesis in edentulous maxilla[J]. Implant Dent, 2010,19(6):498-508.

[12] Bevilacqua M, Tealdo T, Menini M, et al. The influence of cantilever length and implant inclination on stress distribution in maxillary implant-supported fixed dentures[J]. J Prosthet Dent, 2011,105(1):5-13.

[13] Maló P, Rangert B, Nobre M. “All-on-Four” immediate-function concept with Br-nemark System implants for completely edentulous mandibles: a retrospective clinical study[J]. Clin Implant Dent Relat Res, 2003, 5 Suppl 1: 2-9.

[14] Malhotra A, Padmanabhan T, Mohamed K, et al. Load transfer in tilted implants with varying cantilever lengths in an all-on-four situation[J]. Aust Dent J, 2012,57(4):440-445.

[15] Komiyama A, Klinge B, Hultin M, et al. Treatment outcome of immediately loaded implants installed in edentulous jaws following computer-assisted virtual treatment planning and flapless surgery[J]. Clin Oral Implants Res, 2008,19(7):677-685.

[16] Berdougo M, Fortin T, Blanchet E, et al. Flapless implant surgery using an image-guided system. A 1-to 4-year retrospective multicenter comparative clinical study[J]. Clin Implant Dent Relat Res, 2010,12(2):142-152.

[17] Jones RH. Orthognathic surgery and implants[J]. Ann R Australas Coll Dent Surg, 2002,16:105-108.

[18] Turkyilmaz I, Tumer C, Ozbek EN, et al. Relations between the bone density values from computerized tomography, and implant stability parameters: a clinical study of 230 regular platform implants[J]. J Clin Periodontol, 2007,34(8):716-722.

[19] Payne AG, Tawse?鄄Smith A, Thompson WM, et al. Early functional loading of unsplinted roughened surface implants with mandibular overdentures 2 weeks after surgery[J]. Clin Implant Dent Relat Res, 2003,5(3):143-153.

[20] 张志勇, 宿玉成. 国际口腔种植学会(ITI)第四届共识研讨会共识性论述2008[J]. 口腔颌面外科杂志, 2009, 19(1):49-52.

[21] Gallucci GO, Doughtie CB, Hwang JW, et al. Five-year results of fixed implant-supported rehabilitations with distal cantilevers for the edentulous mandible[J]. Clin Oral Implants Res, 2009,20(6):601-607.

[22] McAlarney ME, Stavropoulos DN. Determination of cantilever length-anterior-posterior spread ratio assuming failure criteria to be the compromise of the prosthesis retaining screw-prosthesis joint[J]. Int J Oral Maxillofac Implants, 1996,11(3): 331-339.

[23] Wismeijer D, van Waas MA, Kalk W. Factors to consider in selecting an occlusal concept for patients with implants in the edentulous mandible[J]. J Prosthet Dent,1995,74(4):380-384.

[24] Kim Y, Oh TJ, Misch CE, et al. Occlusal considerations in implant therapy: clinical guidelines with biomechanical rationale[J]. Clin Oral Implants Res,2005,16(1):26-35.

[25] Sadowsky SJ. The implant-supported prosthesis for the edentulous arch: design considerations[J]. J Prosthet Dent,1997,78(1):28-33.

[26] Bijjargi S, Chowdhary R. Stress dissipation in the bone through various crown materials of dental implant restoration: a 2-D finite element analysis[J]. J Investig Clin Dent, 2012, [Epub ahead of print]

[27] Sevimay M, Usumez A, Eskitascioglu G. The influence of various occlusal materials on stresses transferred to implant-supported prostheses and supporting bone: a three-dimensional finite-element study[J]. J Biomed Mater Res B Appl Biomater, 2005,73（1）: 140-147.

[28] Gotfredsen K, Wiskott A, Working Group 4. Consensus report - reconstructions on implants. The Third EAO Consensus Conference 2012[J]. Clin Oral Implants Res, 2012,23 Suppl 6:238-241.

[29] Misch CE. Contemporary implant dentistry [M]. 2nd ed. St. Louis: CV Mosby,1999:534.

[30] Damghani S, Masri R, Driscoll CF, et al. The effect of number and distribution of unsplinted maxillary implants on the load transfer in implant-retained maxillary overdentures: an in vitro study[J]. J Prosthet Dent, 2012,107(6):358-365.

[31] Petrungaro PS, Windmiller N. Using transitional implants during the healing phase of implant reconstruction[J]. Gen Dent,2001,49(1):46-51.

[32] Flanagan D, Mascolo A. The mini dental implant in fixed and removable prosthetics: a review[J]. J Oral Implantol, 2011, 37 Spec No:123-132.
[33] Bulard RA, Vance JB. Multi clinic evaluation using mini-dental implants for long term   denture stabilization: a preliminary biometric evaluation[J]. Compend Contin Educ Dent, 2005,26(12):892-897.

[34] Morneburg TR, Proschel PA. Success rates of microimplants in edentulous patients with   residual ridge resorption[J]. Int J Oral Maxillofac Implants, 2008,3(2):270-276.

[35] Shatkin TE, Shatkin S, Oppenheimer BD. Mini dental implants for long-fixed and removable prosthetics: a retrospective analysis of 2514 implants placed over a five-year period[J]. Compend Contin Educ Dent, 2007,28(2):92-99.

[36] Flanagan D. Fixed partial dentures and crowns supported by very small diameter dental implants in compromised sites[J]. Implant Dent, 2008,17(2):182-191.

[37] Bulard RA. Mini dental implants: enhancing patient atisfaction and practice income[J]. Dent Today, 2001,20(7):82-85.

[38] Watanabe F, Hata Y, Komatsu S, et al. Finite element analysis of the influence of implant inclination, loading position, and load direction on stress distribution[J]. Odontology, 2003,91(1):31-36.

[39] Flanagan D, Ilies H, McCullough P, et al. Measurement of the fatigue life of mini dental implants: a pilot study[J]. J Oral Implantol, 2008,34(1):7-11.

[40] Turkyilmaz I, Tozum TF, Fuhrmann DM, et al. Seven-year follow-up results of TiUnite implants supporting mandibular overdentures: early versus delayed loading[J]. Clin Implant Dent Relat Res, 2012, 14 Suppl 1:e83-e90.

[41] Elian N, Ehrlich B, Jalbout Z, et al． A restoratively driven ridge categorization, as determined by incorporating ideal restorative positions on radiographic templates utilizing computed tomography scan analysis[J]. Clin Implant Dent Relat Res, 2009,11(4):272-278.

[42] Hasan I, Bourauel C, Keilig L, et al. The influence of implant number and abutment design on the biomechanical behaviour of bone for an implant?-supported fixed prosthesis：a finite element study in the upper anterior region[J]. Comput Methods Biomech Biomed Engin, 2011,14(12):1113-1116.

[43] de Almeida EO, Rocha EP, Freitas AC Jr. Finite element stress analysis of edentulous mandibles with different bone types supporting multiple-implant superstructures[J]. Int J Oral Maxillofac Implants, 2010,25(6):1108-1114.

[44] Kreiβel P, Kolpin F, Graef F, et al. Effect of rotating osteotomes on primary implant stability - An in vitro investigation [J]. J Oral Implantol, 2010,19(6):378-389.

[45] Ahuja S, Cagna DR. Classification and management of restorative space in edentulous implant overdenture patients[J]. J Prosthet Dent,2011,105(5):332-337.

[46] Burns DR, Unger JW, Coffey JP, et al. Randomized, prospective, clinical evaluation of prosthodontic modalities for mandibular implant overdenture treatment[J]. J Prosthet Dent, 2011,106(1):12-22.

[47] Mumcu E, Bilhan H, Geckili O. The effect of attachment type and implant number on satisfaction and quality of life of mandibular implant-retained overdenture wearers[J]. Gerodontology, 2012, 29(2): e618-e623.

[48] Geckili O, Mumcu E, Bilhan H. The effect of maximum bite force, implant number, and attachment type on marginal bone loss around implants supporting mandibular overdentures: a retrospective study[J]. Clin Implant Dent Relat Res, 2012,14 Suppl 1:e91-e97.

[49] Wie H. Registration of localization, occlusion and occluding materials for failing screw joints in the Branemark implant system[J]. Clin Oral Implants Res, 1995,6(1):47-53.

[50] Peroz I, Leuenberg A, Haustein I, et al. Comparison between balanced occlusion and canine guidance in complete denture wearers--a clinical, randomized trial[J]. Quintessence Int, 2003,34(8): 607-612.

选择文件类型/文献管理软件名称

选择包含的内容